Segment: Trial
Production years: 2015
The Ossa TR 300i is powered by a 294cc, 2-Stroke, liquid-cooled, single cylinder engine. With a cylinder bore of 3.11 in and stroke of 2.36 in, its motor is oversquare, meaning that the cylinder bore (width) is greater than the stroke (length). This makes the engine more powerful than one of similar displacement with a smaller bore.
engine specs | Type: | Two-stroke single cylinder inverted admission direct reed crankcase | Displacement: | 294.1 cm3 | Bore X Stroke: | 3.1x2.4 in OR 79 mm | Compression Ratio: | - | Horsepower: | -/- KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | EFI Kokusan Battery-less System |
---|
transmission specs | Gearbox: | 6-Speed | Clutch: | Hydraulic | Primary Drive: | Gears | Final Drive: | Chain |
---|
chassis specs | Frame: | Tubular profile CR-Mo steel with pipe and forged aluminium lower | Front Suspension: | Marzocchi hydraulic fork with 40 mm al. sliders Adjustable rebound and compression damping | Rear Suspension: | Progressive hydraulic monoshock TTX Ohlins with adjustable preload, rebound and compression damping | Front Brake: | Disc diameter 185 mm 4-piston calliper | Rear Brake: | Disc diameter 150 mm 2-piston calliper |
---|
dimension specs | Overall Length: | - | Overall Width: | - | Seat Height: | 25.8 in OR 655 mm | Wheelbase: | 52.3 in OR 1328 mm | Ground Clearance: | 13.4 in OR 340 mm | Weight: | 146 lbs OR 66 kg | Fuel Capacity: | 0.7 gallons OR 2.6 L |
---|
tyres specs | Front: | 2.75 x21 | Rear: | 4.00 x18 |
---|
power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
---|